Supplier profile
CENTRAL POWER SYSTEMS & SERVICES, LLC
Every public-sector award we hold for this supplier, across the United States, from 6 Sept 2011 to 8 Oct 2026.
Awards won
3,358
all time
Attributed value
$41.2m
as published
Buyers
14
public bodies
Active
2011–2026
first to latest award
Awards by year
Who they win from
| Buyer | Awards | Value |
|---|---|---|
| Defense Logistics Agency | 2456 | $31.2m |
| Federal Acquisition Service | 838 | $1.0m |
| U.S. Coast Guard | 21 | $2.0m |
| Department of the Navy | 14 | $1.1m |
| DLA LAND AND MARITIME | 13 | $4.0m |
| Department of Veterans Affairs | 4 | $91k |
| Department of the Air Force | 3 | $281k |
| DLA WEAPONS SUPPORT | 2 | $700k |
| Department of the Army | 2 | $28k |
| Animal and Plant Health Inspection Service | 1 | $7k |
What they win
Awards
Showing 2651–2675 of 3,358 awards we hold
- Valve Seat Installer: Type: Valve Seat Installer Used With Jdg676 Valve Seat Driver To Install Valve Seat In 300-Series Diesel Engines. (Partial Description) ↗Federal Acquisition Service£240awarded 17 Aug 2022
- Inserter And Remover, Seal: Type: Inserter And Remover, Seal Operation Method: Non-Impact Material: Steel Shape: Round Features: Used To Install/Remove Front Crankshaft Oil Seal Without Removing Radiator; Used For Cummins Series V-903 Engines Cu ↗Federal Acquisition Service£600awarded 17 Aug 2022
- Extractor, Lamp Capsule: Iaw Aerospace Optics Inc Pn: 17-150 Drawing Type: Vivisun Cap Extractor (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£750awarded 17 Aug 2022
- Wrench, Socket: Iaw Bosch Automotive Service Solutions J-38587-A End Item: Used On Mine Resistant Ambush Protected (Mrap) Vehicles Features: Engines Barring Socket (Partial Description) ↗Federal Acquisition Service£110awarded 17 Aug 2022
- Adapter, Torque Wrench: Iaw Cummins Engine Company Pn 5298979 For Use With Overhead Setting Kit. (Partial Description) ↗Federal Acquisition Serviceawarded 17 Aug 2022
- Brush, Wire, Boiler Tube: Type: Brush, Wire, Boiler Tube Power Operating Feature: Included Power Source For Which Designed: Air Motor Driven Cleaner Universal Joint: Not Included Connector End Design: Male Brush Type: Spiral Brush Diameter: 9/16 ↗Federal Acquisition Service£368awarded 17 Aug 2022
- Injector Tool Group: For Removal And Installation Of Injector Sleeves On Model C-10, C-12 And 3406 Engines. Includes Pns 9u-6877 Thrust Bearing 9u-7258 Driver Cap 9u-7259 Puller Stud 4k-0367 Full Nut 5p-8247 Washer 128-7889 Puller Bridge Caterpi ↗Federal Acquisition Service£1kawarded 17 Aug 2022
- Fault Locator, Fiber Optic Cable: Type: Pen Universal Adapter: 2-1/2 Mm Ferrule Operational Laser Light Injected: 650 Nm Distance Range, Single Mode Fiber: 6-7 Km Distance Range, Multi-Mode Fiber: 4-5 Km Features: Slide Button To Change From Ste ↗Federal Acquisition Service£2kawarded 17 Aug 2022
- Fault Locator, Fiber Optic Cable: Type: Pen Universal Adapter: 2-1/2 Mm Ferrule Operational Laser Light Injected: 650 Nm Distance Range, Single Mode Fiber: 6-7 Km Distance Range, Multi-Mode Fiber: 4-5 Km Features: Slide Button To Change From Ste ↗Federal Acquisition Service£3kawarded 17 Aug 2022
- Installation Tool, Boot Ring: Iaw Kitco Fiber Optics, Pn: 0701-3070 Used To: Snap On The Afsi' S (Formerly Fsi, Fiber Systems International) St Connectors Protective Boot Ring (Partial Description) ↗Federal Acquisition Service£160awarded 17 Aug 2022
- Puller, Hydraulic: Load Capacity: 31 Tons Pump Type: Single Overall Length: 5 Inches Cylinder Diameter: 4 Inches Stroke: 2 Inches Hole Diameter: 1.16 Inches Max Operating Pressure: 10,000 Psi Special Features: External Relief Valve For Rod End O ↗Federal Acquisition Service£1kawarded 17 Aug 2022
- Driver, Water Tube: End Item Identification: Cummins K19, K38 And K50 Series Engines Functional Description: Used To Install/Remove Water Transfer Tubes From Rocker Lever Housings Cummins Engine Co. Inc. Pn 5394833 (Partial Description) ↗Federal Acquisition Service£575awarded 17 Aug 2022
- Inserter And Remover Spring: Description: C6 Spring Compressor Used On: Allison Md 3070 Transfer Case Material: Steel Features: Nonimpact Spring Inserter And Remover Bosch Automotive Service Solutions, Inc., Pn J-38573 (Partial Description) ↗Federal Acquisition Service£590awarded 17 Aug 2022
- Adapter, Torque Wrench: Overall Length: 8 Inches Wrenching Sz: 30 Mm Single End Square Drive Sz: 3/4 Inch Wrenching Shape: 12 Point Material: Steel Features: Box End; Wrench Consists Of P/N 4c9564 (Torque Wrench Adapter), P/N 6v3146 (Tubular Arm ↗Federal Acquisition Service£1kawarded 17 Aug 2022
- Hammer Slide, Mechanical Puller: Overall Length: 28 Inches Height: 2-1/2 Inches Width: 3-1/2 Inches Material: Steel Brp US Inc. Pn 391008 (Partial Description) ↗Federal Acquisition Service£140awarded 17 Aug 2022
- Crimping Tool, Terminal , Hand: Automatically Releases To Prevent Damage After Terminal Is Properly Crimped. Application: Metri-Pack. Component To D.d.e.c. Repair Kit, Bosch Automotive Service Solutions Pn J35888 Bosch Automotive Service Solutio ↗Federal Acquisition Service£220awarded 17 Aug 2022
- Gage, Linkage Gap: End Item Identification: Stanadyne D Series Fuel Injection Pumps Stanadyne Corporation Pn 23080 (Partial Description) ↗Federal Acquisition Service£170awarded 17 Aug 2022
- Compressor, Clutch Spring: C1, C2 And C5 Spring Compressor Set Features: Used To Rebuild Rotating Clutch Module On Allison Series Md Transmissions Bosch Automotive Service Solutions Inc. Pn J-35923-A Or Equal (Exceptions Apply) (Partial Descript ↗Federal Acquisition Service£675awarded 17 Aug 2022
- Inserter, Seal: Used To Install Crankshaft Rear Seal And Wear Sleeve. Consists Of The Following Parts: 1) Rear Installer 1u7594 2) Rear Locator Assembly 177595 3) Modified Bolt 1u7596 4) Sleeve Ring 1u7597 5) Nut Assembly 9s8858 Caterpillar Inco ↗Federal Acquisition Service£850awarded 17 Aug 2022
- Jack, Leveling-Support: Clarke Equipment P/N 36847713 Features: Repair Parts And Specials Tools List For Tm55-1945-205-24p-2 (Partial Description) ↗Federal Acquisition Service£1kawarded 17 Aug 2022
- Installer, Seal And Wear Sleeve: Installer, Seal And Wear Sleeve End Item Identification: Caterpillar 3500 Series Engines With Hydrodynamic Seals General Characteristics: Component Of Tooling For Front And Rear Crankshaft Seal And Wear Sleeve In ↗Federal Acquisition Service£860awarded 17 Aug 2022
- Inserter, Bearing And Bushing: Cummins Inc. Pn 3823818 (Partial Description) ↗Federal Acquisition Service£75awarded 17 Aug 2022
- Fault Locator, Fiber Optic Cable: Type: Pen Universal Adapter: 2-1/2 Mm Ferrule Operational Laser Light Injected: 650 Nm Distance Range, Single Mode Fiber: 6-7 Km Distance Range, Multi-Mode Fiber: 4-5 Km Features: Slide Button To Change From Ste ↗Federal Acquisition Service£700awarded 17 Aug 2022
- Tool Kit, Insert Installation-Removal: For 0.281 Inch Standard And 0.291 Inch Oversz Body Diameter 0.138-40 Pin Installation/Extraction Thread Sz 0.250-48 Body Installation/Extraction Thread Sz End Item Identification Lee Hydraulic Inserts The L ↗Federal Acquisition Service£695awarded 17 Aug 2022
- Inserter, Bearing And Bushing: Output Shaft Front Bearing Remover On A 208 New Process Transfer Case. Boss Length: 1-1/2 Inches Drive End Type: Boss Bosch Automotive Service Solutions Incorporated Pn J-29168 Or Wright Tools Pn 29168 Or Equal (Pa ↗Federal Acquisition Service£205awarded 17 Aug 2022
Bidding against them?
Get new tenders in their space in a daily digest, scored against your own capability — plus the full notice behind each of these awards, with the documents and contacts it published.
Start 7-day free trialHow this profile is built
Awards are collected from official public procurement notices and deduplicated so one procurement counts once. Supplier names are grouped across their published spellings: case and punctuation are ignored, and “Ltd” is treated as optional because buyers routinely leave it off. Everything else that marks a different organisation is kept — an LLP, a plc, a CIC and a Teoranta are separate businesses from a Ltd of the same name, as are a parent and a named subsidiary, and none of them are merged here. Where another entry differs from this one only by legal form or a bracketed qualifier it is listed above as possibly the same organisation — a hint for the reader, never a merge: figures are per legal entity and never combined. Value is attributed only where the notice is explicit: the supplier's own itemised amount, or the whole value where they were the sole named supplier. Awards naming several suppliers without a published split are counted and marked shared, never valued, and a framework ceiling is never treated as money any one appointed supplier won. Sterling and euro are never added together. The linked source notice is authoritative.
Company pages are for organisations. If this page profiles you as an individual — a sole trader or an individual contractor — you can ask for it to be withheld: see how.