Supplier profile
F & M MICRO PRODUCTS INC
Every public-sector award we hold for this supplier, across the United States, from 22 Jan 2019 to 7 Oct 2026.
Awards won
17,845
all time
Attributed value
$15.2m
as published
Buyers
5
public bodies
Active
2019–2026
first to latest award
Awards by year
Who they win from
| Buyer | Awards | Value |
|---|---|---|
| Federal Acquisition Service | 17830 | $14.9m |
| Department of State | 7 | $143k |
| Defense Logistics Agency | 6 | $91k |
| Department of the Air Force | 1 | $13k |
| GSA/FAS/GSS/QSCB, SUPPLY CHAIN MANAGEMENT CONTRACTING DIVISION | 1 | $17k |
What they win
Awards
Showing 6276–6300 of 17,845 awards we hold
- Polish, Plastic Aircraft Canopy:shall Be In Accordance With Qpl P-P-560-12. Type 1, Liquid. Ten(10) Each 16 Ounce Containers. ↗Federal Acquisition Service$8kawarded 16 May 2025
- Mat, Gymnasium: 3-Panelfolding Mat (Accordion Type) 14 Oz/Sq Yd Minimum; Vinyl Covered Polyurethane; Foam Filling; 4'wx6'lx2''d; Velcro Tape On4'end ↗Federal Acquisition Service$960awarded 15 May 2025
- Opener, Can, Hand: Iaw Cid A-A-52206c. Type I Household, Portable, Class 2- Wing Operated Feed Wheel, Grade A Standard Commercial Quality ↗Federal Acquisition Service$68awarded 15 May 2025
- Applicator,disposable: Non-Sterile Cotton Tipped Applicators. Wooden Shaft Is 6.25" In Length With A Cotton Tip Of 1/2 Inch. U/I Is Box Of Ten (10) Packages Of One Hundred (100) Applicators In Autoclavable Bags. ↗Federal Acquisition Service$311awarded 15 May 2025
- Brush, Dusting, Lens And Photographic Negative:style: Paintbrush Style; Overall Length: 6.0 Inches Minimum; Overall Width: 1.0 To 1.25 Inches;overall Thickness: 0.25inch Minimum; Handle Length: 4.0 Inches Minimum; Fill: Blend Of 40 Percent Soft Horse ↗Federal Acquisition Service$279awarded 15 May 2025
- Polish, Plastic: Plastic Polish To Be Used On F-16 Aircraft Canopies. Approved As Type Ii Polish And Identified In Usafvendor Item Control Dwg.200925154-03. Ten (10)each Sixteen (16) Ouncecontainers Per Box. ↗Federal Acquisition Service$2kawarded 15 May 2025
- Brush,wire,tubeed In Wire Brush, Galvanized Steel Stem With Eye Loop Handle, Nylon Fill, Overall Length 6.25 Inches, Brush Length 2 Inches, Brush Diameter 0.25 Inch Inch ↗Federal Acquisition Service$1kawarded 15 May 2025
- Cloth,abrasivem Oxide, 120 Grit, Jeans Cloth Backing, 9.00 Inch Width, 11.00 Inch Length. ↗Federal Acquisition Service$690awarded 15 May 2025
- Brush,wire,tubed In Wire, Single Spiral, Galvanized Steel Stemwith Eye Loop Handle, Nylon Fill,overall Length6.25 Inches, Brush Length 2 Inches, Brush Diameter 0.375 Inches ↗Federal Acquisition Service$65awarded 15 May 2025
- Brush, Dusting, Lens And Photographic Negative:style: Paintbrush Style; Overall Length: 6.0 Inches Minimum; Overall Width: 1.0 To 1.25 Inches;overall Thickness: 0.25inch Minimum; Handle Length: 4.0 Inches Minimum; Fill: Blend Of 40 Percent Soft Horse ↗Federal Acquisition Service$14awarded 15 May 2025
- Toothpaste: Regular: Regular Non-Fluoride Tooth Paste In A 1.5 +/- 0.01 Ounce Tube. Twelve (12) Esch Per Container. ↗Federal Acquisition Service$73awarded 15 May 2025
- Disk,abrasive ↗Federal Acquisition Service$1kawarded 15 May 2025
- Holder, Toilet Paper, Single Roll, Shallin Public Restrooms. Holderconsist Of Two Brackets And Spring Actuated Roller, Posts Shall Be Stinless Steel, Aluminum Or Chromuim Plated Copper Alloy Or Zinc Alloy, Roller Shall Be Similar Metal Or Plastic, Mo ↗Federal Acquisition Service$99awarded 15 May 2025
- Sponge, Replacement Sponge Filler Compatible With Pace Sponge Cleaning Tool P/N 1100-0233. 2.75" Long, .90" Wide, .62" Thick, Cellulose, Yellow.u/I Pg (5 Per Pg) Pace Inc. P/N 4021-006-P5 Or Equal. ↗Federal Acquisition Service$29awarded 15 May 2025
- Disk, Abrasive, Aluminum Oxide, 60 Grit, Drills Cloth Backing, Plain, Flat, No Arbor Hole, Shall Be Functionally Compatible With Quick Change, Snap-On Mechanical Locking Device Back-Up Pads, 3.00 Inch Disk Diameter ↗Federal Acquisition Service$352awarded 15 May 2025
- Screw, Lag, .375 Inch Diameter, 3.00 Inch Length, Commercial Steel, Hexagon Head, Zinc Plated. ↗Federal Acquisition Service$149awarded 15 May 2025
- Opener, Can, Hand: Iaw Cid A-A-52206c. Type I Household, Portable, Class 2- Wing Operated Feed Wheel, Grade A Standard Commercial Quality ↗Federal Acquisition Service$84awarded 15 May 2025
- Disk, Abrasive, Aluminum Oxide, 36 Grit, "yf" Weight Cloth Backing, Plain Flat, Functionally Compatible With Quick Change Female Threaded Style Mechanical Locking Device Back-Up Pads, 2.00 Inch Disk Diameter ↗Federal Acquisition Service$180awarded 15 May 2025
- Disk,abrasive ↗Federal Acquisition Service$1kawarded 15 May 2025
- Hinge, Butt, 4.500 Inch Height, 2.500 Inch Width, (Closed .134 Inch Thickness, 8-Screw Holes Per Hinge Set, (4-Holes Per Hinge Half, .193 Inch Hole Diameter, Full, Heavy-Duty, Mortise Hinge, Standard Weight, Plain Bearing, Wrought Steel, Forged Steel ↗Federal Acquisition Service$377awarded 15 May 2025
- Disk, Abrasive, Hard Plastic, Smooth Face, Back-Up Pad, .625-11 Threaded Attachment, 7.00 Inch Diameter. ↗Federal Acquisition Service$56awarded 15 May 2025
- Holder Pad,abrasivek: Outside Diameter: 2 Inches Shank: Straight Round Shank Sz: 0.25 Inchshanklength: 1.625 Inches Shank Thread Sz And Series:14-20 Unc Max Safe Speed: 20,000 Rpm Minattachment Type: Roloc Tr Material: Rubber (Partial Description) ↗Federal Acquisition Service$339awarded 15 May 2025
- Hook, Door, 8-Inch, Bronze, Door Hook Assembly Is Used In Holding Doors Open, Shall Include A Hook And Pad Assembly With Separate Mounting Pad Designed To Be Mounted To A Door.6-Gauge Or Larger Brass Or Bronze Countersunk Wood Screws. ↗Federal Acquisition Service$800awarded 15 May 2025
- Opener, Can, Hand: Iaw Cid A-A-52206c. Type I Household, Portable, Class 2- Wing Operated Feed Wheel, Grade A Standard Commercial Quality ↗Federal Acquisition Service$34awarded 15 May 2025
- Holder Pad,abrasivek: Outside Diameter: 2 Inches Shank: Straight Round Shank Sz: 0.25 Inchshanklength: 1.625 Inches Shank Thread Sz And Series:14-20 Unc Max Safe Speed: 20,000 Rpm Minattachment Type: Roloc Tr Material: Rubber (Partial Description) ↗Federal Acquisition Service$678awarded 15 May 2025
Bidding against them?
Get new tenders in their space in a daily digest, scored against your own capability — plus the full notice behind each of these awards, with the documents and contacts it published.
Start 7-day free trialHow this profile is built
Awards are collected from official public procurement notices and deduplicated so one procurement counts once. Supplier names are grouped across their published spellings: case and punctuation are ignored, and “Ltd” is treated as optional because buyers routinely leave it off. Everything else that marks a different organisation is kept — an LLP, a plc, a CIC and a Teoranta are separate businesses from a Ltd of the same name, as are a parent and a named subsidiary, and none of them are merged here. Where another entry differs from this one only by legal form or a bracketed qualifier it is listed above as possibly the same organisation — a hint for the reader, never a merge: figures are per legal entity and never combined. Value is attributed only where the notice is explicit: the supplier's own itemised amount, or the whole value where they were the sole named supplier. Awards naming several suppliers without a published split are counted and marked shared, never valued, and a framework ceiling is never treated as money any one appointed supplier won. Sterling and euro are never added together. The linked source notice is authoritative. Profiles may take up to an hour to reflect newly collected records.
Company pages are for organisations. If this page profiles you as an individual — a sole trader or an individual contractor — you can ask for it to be withheld: see how.