Supplier profile
MID-CONTINENT MACHINING INC
Every public-sector award we hold for this supplier, across the United States, from 4 Jan 2019 to 25 Aug 2026.
Awards won
785
all time
Attributed value
$2.8m
as published
Buyers
3
public bodies
Active
2019–2026
first to latest award
Awards by year
Who they win from
| Buyer | Awards | Value |
|---|---|---|
| Federal Acquisition Service | 627 | $781k |
| Defense Logistics Agency | 157 | $1.7m |
| DLA AVIATION | 1 | $350k |
What they win
Awards
Showing 401–425 of 785 awards we hold
- Wrench, Valve Seat Ring: Iaw Naval Ships Systems Drawing Number 803-4384536, Revision F, Dated 8/6/85. Drawing Pn 803-4384536-71bx-53. Octagonal Drive Sz: 1.488 Inches Valve Sz: 7 For 1-1/2 Inch Valve Material: Steel This Item References A Restricted ↗Federal Acquisition Service£67awarded 30 Jan 2024
- Screw, Jacking: Iaw Naval Ship Systems Command Drawing Number 845-4687720, Dated 22 Jul 75, Revision A, Dated 31 Jul 75. Consists Of Items 40-1 & 40-2; Special Tool Developed For Use On Trident Submarine (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Wrench Assembly: Iaw Navy Department Buships Drawing Number 3139549 Rev A. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Wrench, Spanner: Iaw Naval Ships Systems Command, Drawing Number 4687720, Revision A Dated 07-22-1975, Item 5 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Socket, Wrench, Face Spanner: End Use: Hummer Vehicle Wrench End Outside Diameter: 2-3/4 Inches Drive End Outside Diameter: 2-3/4 Inches Wrench End Sz: 2 Inches Square Drive Sz: 1/2 Inch Internal Material: Steel Coating: Zinc Features: Lock Nut; Two ↗Federal Acquisition Service£90awarded 30 Jan 2024
- Pin, Alignment: Iaw Naval Sea Systems Command Drawing Number 5205493 Revision A. Exception To Drawing: Note 3: Finish Shall Be Nickel/Chrome Plated In Lieu Of Cadmium Plated. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£405awarded 30 Jan 2024
- Wrench, Spanner: Iaw Department Of The Navy, Naval Ship Systems Command Drawing Number 845-4687720, Rev. A, Dated 7/22/1975 Item 16 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Wrench, Spanner: Iaw Navy Ship Systems Command Drawing Number 4687720, Revision A, Dated July 22, 1975, Item #1. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Puller, Pin: Iaw Sikorsky Aircraft Drawing 65700-25003, Dated August 20, 1964. Piece Number 041 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Wrench Assembly: Iaw Navy Department Buships Drawing Number 3139549 Rev A. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£316awarded 30 Jan 2024
- Screwdriver, Flat Tip: Iaw Department Of The Army Ordnance Corps Drawing 5326404, Revision 3, Dated December 3, 1953. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£190awarded 30 Jan 2024
- Inserter, Seal: Iaw Naval Ship Engineering Center Drawing Number Re-B102228, Rev. A, Dated 3/24/1969 Coating: Oxide (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£84awarded 30 Jan 2024
- Socket, Socket Wrench: Iaw Naval Aviation Depot, U. S. Marine Corps Air Station Drawing 18c2268 Revision A, Dated August 13, 2001. Pn 18c2268-2 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£167awarded 30 Jan 2024
- Adapter, Ball Puller: Iaw Department Of The Navy, Naval Ship Systems Command Drawing 2178493, Revision A. Piece Number 51. Exception To Drawing: Use Ansi Y14.6 In Lieu Of Mil-Std 9. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Screwdriver Attachment, Socket Wrench: Iaw GSA Drawing 5120-00-321-4508, Dated December 21, 1994. Cowl Fastener With 1/4 Inch Square Drive Female Socket, 5/8 Inch Tip Width And, 1-1/2 Inch Overall Length. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 30 Jan 2024
- Wrench, Drain Plug: Coating: Phosphate Iaw U.s. Army Tank Automotive Center Drawing Number 11595203 Rev. B, Dated 9/18/1972 Exception To Drawing: For Phosphate Coatings, Heavy, Manganese Or Zinc Base Metals (For Ferrous Metals): Use Mil-Dtl-16232 In ↗Federal Acquisition Service£172awarded 30 Jan 2024
- Remover, Bearing And Bushing: Fairbanks Morse Pn 16102342 (Partial Description) ↗Federal Acquisition Service£214awarded 30 Jan 2024
- 8510338045!fixture,track Conne ↗Defense Logistics Agency£72kawarded 17 Dec 2023
- 8510336987!socket,wrench,face ↗Defense Logistics Agency£3kawarded 17 Dec 2023
- 8510294552!wrench,valve Seat R ↗Defense Logistics Agency£760awarded 1 Dec 2023
- Alignment Tool, Brush Block: Iaw U.s. Armament Research And Development Command Drawing 12979832, Revision A Dated 04-23-1997. (Partial Description) ↗Federal Acquisition Service£819awarded 28 Nov 2023
- Remover, Valve Seat Insert: Iaw GSA Dwg. 5120-494-1836, Dtd 3/8/67. Remover, Valve Seat Insert End Item Identification: Detroit Diesel Series 71, V-71 (2 Valve), 50 And 60 Engines General Characteristics: Includes Puller Assembly J23479-35 And 1 Coll ↗Federal Acquisition Serviceawarded 22 Nov 2023
- Wrench, Spanner: Iaw Naval Sea Systems Drawing 803-5001003, Sheet 15, Revision A, Dated 23 June 1982. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£3kawarded 22 Nov 2023
- Wrench, Open End: Iaw Ordnance Corps, Department Of The Army Detroit Arsenal Drawing Number 8708683, Dated Revision C, Dated 10 Dec 63. Exception To Drawing: Use Mil-Dtl-16232 Phosphate Coatings, Heavy, Manganese Or Zinc Base (For Ferrous Metals) In ↗Federal Acquisition Service£654awarded 17 Nov 2023
- Puller, Mechanical: Iaw GSA Purchase Description 5120-00-288-7713 Dated 18 May 99 Type: Gear And Bearing Consists Of A Cross Block, Slide Plates And Washers, Forcing Screw Nut, Securing Nuts Or Bolts, And Legs. Puller Sz: 1 Spread Range: 2-1/8 Inches ↗Federal Acquisition Serviceawarded 7 Nov 2023
Bidding against them?
Get new tenders in their space in a daily digest, scored against your own capability — plus the full notice behind each of these awards, with the documents and contacts it published.
Start 7-day free trialHow this profile is built
Awards are collected from official public procurement notices and deduplicated so one procurement counts once. Supplier names are grouped across their published spellings: case and punctuation are ignored, and “Ltd” is treated as optional because buyers routinely leave it off. Everything else that marks a different organisation is kept — an LLP, a plc, a CIC and a Teoranta are separate businesses from a Ltd of the same name, as are a parent and a named subsidiary, and none of them are merged here. Where another entry differs from this one only by legal form or a bracketed qualifier it is listed above as possibly the same organisation — a hint for the reader, never a merge: figures are per legal entity and never combined. Value is attributed only where the notice is explicit: the supplier's own itemised amount, or the whole value where they were the sole named supplier. Awards naming several suppliers without a published split are counted and marked shared, never valued, and a framework ceiling is never treated as money any one appointed supplier won. Sterling and euro are never added together. The linked source notice is authoritative.
Company pages are for organisations. If this page profiles you as an individual — a sole trader or an individual contractor — you can ask for it to be withheld: see how.