Supplier profile
TIMBER EDGE MACHINE INC.
Every public-sector award we hold for this supplier, across the United States, from 2 Aug 2018 to 11 Aug 2026.
Awards won
1,934
all time
Attributed value
$655k
as published
Buyers
1
public bodies
Active
2018–2026
first to latest award
Awards by year
Who they win from
| Buyer | Awards | Value |
|---|---|---|
| Federal Acquisition Service | 1934 | $655k |
What they win
Awards
Showing 551–575 of 1,934 awards we hold
- Inserter, Seal: Iaw U. S. Army Tank Automotive Command Drawing Number 11629671, Dated 02-26-80. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£483awarded 23 May 2024
- Depressor, Spring: Iaw Allison Division, General Motors Corp., Drawing Number 6796975 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£386awarded 23 May 2024
- Wrench, Piston: Iaw U.s. Army Armament Research, Development And Engineering Center Drawing 12984937 Used On: M230 Automatic Cannon (30mm). Features: Steel; T-Handle; 3 Inch Handle; 3 Inch Stem (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£252awarded 23 May 2024
- Punch, Fastener Setting: Iaw United-Carr Fastener Corp. Drawing Number 8059 Dated January 20, 1955. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£189awarded 23 May 2024
- Punch, Drive Pin: Iaw Navy Department, Bureau Of Ships, Drawing Number S2603-840327, Rev. D, Dated 12/28/1966 Piece Numbers 14 And 15 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£168awarded 23 May 2024
- Wrench, Socket: Iaw Naval Sea Systems Command Drawing Number 5944323, Revision A, Dated April 4, 1985. Exception To Note: Refer To Ansi 5.1 In Lieu Of Fed Spec Qq-E-450. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£126awarded 23 May 2024
- Inserter, Seal: Iaw U. S. Army Tank Automotive Command Drawing Number 11629671, Dated 02-26-80. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£161awarded 23 May 2024
- Pin, Spanner Wrench: Iaw Department Of The Navy, Naval Ordnance Systems Command, Drawing Number 2847282, Dated 6/1/1970 Dash Number 2847282-4 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£84awarded 23 May 2024
- Wrench, Spanner: Iaw Usarmy Aviation And Missile Command Drawing Numberrttc08255 Locknut Wrenchfor Tail Rotor Gear Box;ah- 64 Project (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£910awarded 23 May 2024
- Adapter, Torque Wrench:iaw U.s. Naval Ship Systems Command Drawing Number 2588756, Rev. A. Exceptions To Drawing: Use Mil-S-46172 In Lieu Of Mil-S-13048 Use Astm A304in Lieu Of Qq-S-624 Useqq-S-698 In Lieu Of Qq-S-626 Coating: Chrome (Exceptions Appl ↗Federal Acquisition Service£2kawarded 23 May 2024
- Drift, Drill: - See Attached Document For Detail. ↗Federal Acquisition Service£213awarded 23 May 2024
- Die, Fastener Setting: Iaw GSA Drawing Number 343-8210, Revision D, Dated 3/9/1989 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£294awarded 9 May 2024
- Locating, Piece: Iaw Department Of The Navy Bureau Of Naval Weapons Drawing Number 1222287. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£252awarded 9 May 2024
- Reamer, Hand: Iaw U.s. Army Natick Research & Development Center Drawing Number 5-13-4439, Dated 1/25/90. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Serviceawarded 9 May 2024
- Punch, Fastener Setting: Iaw United-Carr Fastener Corp. Drawing Number 8059 Dated January 20, 1955. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£126awarded 9 May 2024
- Die, Fastener Setting: Iaw GSA Drawing Number 5110-00-509-8062. Material Shall Be Casehardened (File Hard) Steel. The Die Shall Be Smooth, And Edges Shall Be Rounded Or Beveled. The Die Shall Be Coated Or Otherwise Treated To Prevent Rust. When Used ↗Federal Acquisition Service£74awarded 9 May 2024
- Remover, Preformed Packing: Iaw Naval Sea Systems Command Drawing Number 5211840, Revision A, Dated April 1981. Coating: Oxide (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£133awarded 6 May 2024
- Screwdriver Attachment, Socket Wrench: Iaw GSA Drawing 5120-00-321-4508, Dated December 21, 1994. Cowl Fastener With 1/4 Inch Square Drive Female Socket, 5/8 Inch Tip Width And, 1-1/2 Inch Overall Length. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£56awarded 3 May 2024
- Wrench, Spanner: Iaw General Services Administration Drawing Number 098-4366, Dated 11/9/1973 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£301awarded 2 May 2024
- Adapter, Torque Wrench: Iaw U.s. Army Tank Automotive Command Drawing 12316128, Rev A, Dated 25 Jan 84. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£294awarded 2 May 2024
- Wrench, Spanner: Iaw Usarmy Aviation And Missile Command Drawing Numberrttc08255 Locknut Wrenchfor Tail Rotor Gear Box;ah- 64 Project (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£455awarded 2 May 2024
- Adapter, Torque Wrench: Iaw U.s. Army Tank Automotive Command Drawing 12316128, Rev A, Dated 25 Jan 84. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£147awarded 2 May 2024
- Puller, Mechanical: Iaw U.s. Army Tank Automotive Command Drawing Number 12271330 Revision B. Features: Puller Mechanical Includes Pusher P/N 1920712271328; Adapter P/N 1920712271329 For Additional Information See Drawing 1920712271330. (Exceptions A ↗Federal Acquisition Service£805awarded 26 Apr 2024
- Remover And Replacer Assembly: Iaw U.s. Tank Automotive Command Drawing Number 12282489, Revision C, Dated 20 Jan 82. Characteristics Item Description: Material: Steel 1020 To 1025, Astm A108 Or A576 Heat Treatment: Case Harden Outside Surface Only O ↗Federal Acquisition Service£630awarded 26 Apr 2024
- Closer, Wire Bound Container: Iaw Picatinny Arsenal Ordnance Corp, Department Of The Army Drawing Number 8864731, Datedapril 30, 1963 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£112awarded 26 Apr 2024
Bidding against them?
Get new tenders in their space in a daily digest, scored against your own capability — plus the full notice behind each of these awards, with the documents and contacts it published.
Start 7-day free trialHow this profile is built
Awards are collected from official public procurement notices and deduplicated so one procurement counts once. Supplier names are grouped across their published spellings: case and punctuation are ignored, and “Ltd” is treated as optional because buyers routinely leave it off. Everything else that marks a different organisation is kept — an LLP, a plc, a CIC and a Teoranta are separate businesses from a Ltd of the same name, as are a parent and a named subsidiary, and none of them are merged here. Where another entry differs from this one only by legal form or a bracketed qualifier it is listed above as possibly the same organisation — a hint for the reader, never a merge: figures are per legal entity and never combined. Value is attributed only where the notice is explicit: the supplier's own itemised amount, or the whole value where they were the sole named supplier. Awards naming several suppliers without a published split are counted and marked shared, never valued, and a framework ceiling is never treated as money any one appointed supplier won. Sterling and euro are never added together. The linked source notice is authoritative.
Company pages are for organisations. If this page profiles you as an individual — a sole trader or an individual contractor — you can ask for it to be withheld: see how.