Supplier profile
TIMBER EDGE MACHINE INC.
Every public-sector award we hold for this supplier, across the United States, from 2 Aug 2018 to 11 Aug 2026.
Awards won
1,934
all time
Attributed value
$655k
as published
Buyers
1
public bodies
Active
2018–2026
first to latest award
Awards by year
Who they win from
| Buyer | Awards | Value |
|---|---|---|
| Federal Acquisition Service | 1934 | $655k |
What they win
Awards
Showing 1601–1625 of 1,934 awards we hold
- Alignment Tool, Electronic Equipment: Iaw GSA Drawing 5120-00-060-6423, Dated 4 Sep 2003. Overall Length: 6 Inches Minimum And 8 Inches Max Unit Type: Screwdriver Working End Quantity: 2 Material: Plastic (Partial Description) ↗Federal Acquisition Service£105awarded 20 Apr 2022
- Batten, Shore Measuring: - See Attached Document For Detail. ↗Federal Acquisition Service£2kawarded 18 Apr 2022
- Adapter, Torque Wrench: Iaw Naval Ship Systems Command Drawing Number 2588821, Revision A, Dated March 14, 1974. Exceptions To Drawing: Note 2: In Lieu Of Mil-S-13048, Use Mil-S-46172 Note 3: Finish Shall Be Nickel, Chrome Or Oxide Note 5: Mark ↗Federal Acquisition Service£70awarded 16 Apr 2022
- Adjusting Tool, Valve Tappet: Used With Unit 8 Maintenance Kit 1213d1597 Lockheed Martin Corp. Pn 1214c3239 (Partial Description) ↗Federal Acquisition Service£91awarded 16 Apr 2022
- Installing Tool Set, O-Ring: Component Quantity: 13 O-Ring Installers Included: One Each Of The Following 13 Szs: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2, 1-3/4, And 2 Inches Included: Metal, Wood, Or Plastic Case (Exceptions A ↗Federal Acquisition Service£840awarded 16 Apr 2022
- Combination Tool: Iaw Department Of The Navy Naval Air Systems Command Drawing Number 1732as590, Dated 21 Sep 88. Overall Length: 24 Inches Material: Steel Features: T-Handle; Combination Oil Buffer Gage And Three 0.083 X 0.940 Inch Bosses (Exce ↗Federal Acquisition Service£394awarded 16 Apr 2022
- Screwdriver Attachment, Socket Wrench: Iaw Gould Clevite Ordnance Division Drawing Ca49223, Dated 17 Mar 73, Revision C, (Undated). Bit Sz: 3/32 Inch; Drive Sz: 1/4 Inch. Exception To Drawing: Use Mil-T-31000 Int Amd 2, General Specification For ↗Federal Acquisition Service£77awarded 16 Apr 2022
- Bar, Piston Support: Iaw GSA Drawing Number 5120-391-6804, Dated March 10, 1969. General Characteristics: Brass; Overall Length 5-3/4 Inches; 5/8 Inch Square; Machined And Bent; For Use On Fairbanks Morse Engine Model 38d 8-1/2 Inches Bore. (Exc ↗Federal Acquisition Service£84awarded 16 Apr 2022
- Installing Tool Set, O-Ring: Component Quantity: 13 O-Ring Installers Included: One Each Of The Following 13 Szs: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2, 1-3/4, And 2 Inches Included: Metal, Wood, Or Plastic Case (Exceptions A ↗Federal Acquisition Service£210awarded 16 Apr 2022
- Installing Tool Set, O-Ring: Component Quantity: 13 O-Ring Installers Included: One Each Of The Following 13 Szs: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2, 1-3/4, And 2 Inches Included: Metal, Wood, Or Plastic Case (Exceptions A ↗Federal Acquisition Service£1kawarded 16 Apr 2022
- Wrench, Torque: Iaw Grumman Aerospace Corp Drawing Number 123gt10103, Revision G, Dated 3/7/79. (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£2kawarded 16 Apr 2022
- Inserter, Bearing And Bushing: Iaw General Motors Of Canada Limited Drawing Number 10512220, Rev. A, Dated July 3, 1985 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£105awarded 16 Apr 2022
- Wrench, Spanner: Iaw Naval Sea System Command Drawing Number 803-5959296 Pn 803-5959296-Ta-56 Or 845-6640841-Ta56 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£50awarded 16 Apr 2022
- Installing Tool Set, O-Ring: Component Quantity: 13 O-Ring Installers Included: One Each Of The Following 13 Szs: 1/8, 3/16, 1/4, 5/16, 3/8, 1/2, 5/8, 3/4, 1, 1-1/4, 1-1/2, 1-3/4, And 2 Inches Included: Metal, Wood, Or Plastic Case (Exceptions A ↗Federal Acquisition Service£630awarded 16 Apr 2022
- Extension, Screwdriver Bit: Iaw Raytheon Drawing Number 3225210, Rev A, Dated 10/09/06 Containing Pn: 3225210-1 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£88awarded 16 Apr 2022
- Wrench, Spanner: Iaw Ingersoll Rand Co. Drawing Number 12419d18 Rev. 1, Dated 10/6/1986 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£196awarded 16 Apr 2022
- Wrench, Valve Seat Ring: Overall Length: 9 Inches Width Across Flats: 1-11/16 Inches End Item Identification: Union Flonetics Sz 2 Inches; R-10 Safety Relief Valve. (Partial Description) ↗Federal Acquisition Service£112awarded 16 Apr 2022
- Jack, Hydraulic, Hand: Load Capacity: 50 Tons Retracted Height: 11 Inches Max Extended Height: 16-5/8 Inches Minimum Hose Overall Length: 6 Feet Minimum Features: Consists Of A Hydraulic Hand Pump With A Reservoir, Hydraulic Ram And Hose Assembl ↗Federal Acquisition Service£4kawarded 16 Apr 2022
- Adjusting Tool, Brake: Iaw Department Of The Navy, Naval Ship Systems Command, Drawing Number 2587240, Rev. A, Dated 1/17/1972 Exceptions To Drawing: Coating: Chrome, Nickel, Zinc, Or Oxide In Lieu Of Cadmium Note 2: Hot Rolled And Cold Finish S ↗Federal Acquisition Service£46awarded 14 Apr 2022
- Wrench, Spanner: Iaw U.s. Army Edgewood Arsenal Drawing Number C81-1-9726, Revision A, Dated January 27, 1976 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£64awarded 12 Apr 2022
- Wrench, Spanner: Iaw U.s. Army Edgewood Arsenal Drawing Number C81-1-9726, Revision A, Dated January 27, 1976 (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£128awarded 12 Apr 2022
- Alignment Tool, Plunger: Overall Length: 3-1/2 Inches Flange Inner Diameter: 1.751 Inches Flange Diameter: 4-1/2 Inches Guide Length: 1/2 Inch Material: Aluminum. Flange Feature: Four (4) Equally Spaced 5/16 Inch Holes On Flange (Partial Descrip ↗Federal Acquisition Service£252awarded 9 Apr 2022
- Wrench, Box: Iaw Cid A-A-1341a, Dated February 5, 2002. 12-Point Overall Length: 13-9/16 Inches Wrench Opening: 2-1/4 Inches Material: Steel Coating: Oxide (Exceptions Apply) (Partial Description) ↗Federal Acquisition Service£210awarded 9 Apr 2022
- Adapter, Torque Wrench: Iaw U.s. Naval Ship Systems Command Drawing Number 2588756, Rev. A, Dated 9/14/1973 Exceptions To Drawing: Use Mil-S-46172 In Lieu Of Mil-S-13048 Use Astm A304 In Lieu Of Qq-S-624 Use Qq-S-698 In Lieu Of Qq-S-626 Coating: ↗Federal Acquisition Service£147awarded 9 Apr 2022
- Alignment Tool, Plunger: Overall Length: 3-1/2 Inches Flange Inner Diameter: 1.751 Inches Flange Diameter: 4-1/2 Inches Guide Length: 1/2 Inch Material: Aluminum. Flange Feature: Four (4) Equally Spaced 5/16 Inch Holes On Flange (Partial Descrip ↗Federal Acquisition Service£126awarded 9 Apr 2022
Bidding against them?
Get new tenders in their space in a daily digest, scored against your own capability — plus the full notice behind each of these awards, with the documents and contacts it published.
Start 7-day free trialHow this profile is built
Awards are collected from official public procurement notices and deduplicated so one procurement counts once. Supplier names are grouped across their published spellings: case and punctuation are ignored, and “Ltd” is treated as optional because buyers routinely leave it off. Everything else that marks a different organisation is kept — an LLP, a plc, a CIC and a Teoranta are separate businesses from a Ltd of the same name, as are a parent and a named subsidiary, and none of them are merged here. Where another entry differs from this one only by legal form or a bracketed qualifier it is listed above as possibly the same organisation — a hint for the reader, never a merge: figures are per legal entity and never combined. Value is attributed only where the notice is explicit: the supplier's own itemised amount, or the whole value where they were the sole named supplier. Awards naming several suppliers without a published split are counted and marked shared, never valued, and a framework ceiling is never treated as money any one appointed supplier won. Sterling and euro are never added together. The linked source notice is authoritative.
Company pages are for organisations. If this page profiles you as an individual — a sole trader or an individual contractor — you can ask for it to be withheld: see how.