Skip to content

65" Dual Heat Wide Format Roll Laminator

open

NSWC INDIAN HEAD DIVISION · DEPT OF DEFENSE

Read the notice at sam-gov ↗

Value
unstated
Published
20 Nov 2026
Deadline
8 Dec 2026, 22:00 GMT · 17d left · as published, verify on the notice
Type
opportunity
US-MD

Description

The purpose of this amendment is to provide clarification regarding the Brand Name or Equal requirement, Country of Origin compliance, update required specifications, clarify delivery and set-up information and to extend the quote submission deadline. Clarification of Brand Name or Equal Standard: Solicitation N0017427Q1002 is issued on a "Brand Name or Equal" basis. The brand name referenced in the schedule (GFP – 865DH-4RS) serves solely to establish the standard of quality, performance, and salient characteristics required by the Government. 2. Country of Origin & Prohibited / Ineligible Sources: The Government has determined that the specified brand name item is manufactured in the People's Republic of China. Under applicable federal procurement statutes and regulations the Buy American Act (FAR Part 25) / Trade Agreements Act / agency supply chain directives, items manufactured in China are non-compliant and ineligible for award under this solicitation. 3. Submission of "Equal" Products Required: The Government actively solicits and requires offers proposing an "equal" product manufactured in a compliant country (e.g., the United States or an eligible Trade Agreements Act designated country). Offerors proposing an equal product must demonstrate that their proposed item meets or exceeds all salient physical, functional, and performance characteristics specified in the solicitation. 4. Required Submission Information for Equal Products: To be determined technically acceptable, any quote proposing an equal product must include: Complete product identification (manufacturer name, part/catalog number, and country of manufacture). Clear, written certification of the item's Country of Origin. Technical cut sheets, descriptive literature, and a point-by-point cross-reference verifying that the proposed product meets all salient characteristics outlined. 5. UPDATED SPECIFICATIONS: New Specifications: Equal to or Similar Item SPECIFICATIONS Laminating Width - 63” to 65” Roller Diameter - 5” Maximum Speed (ft/min) - 13 ft/min Main Roller - Silicone Maximum Roller Gap - 1” Roller Gap Adjustment - Dual Hand Crank Unwinds - Top/bottom Liner Rewind - Chain Drive Supply Shafts - 3 (Two Swing-Out 3” Quick Grip) Tension Adjustment - Single Knob Maximum Supply Roll Diameter - 8” Top/16” Bottom Swing-Out Shaft Maximum Weight - 115 lbs. Maximum Temperature - 266ºF Heating Element - Quartz Heater Roller Heating - Top & Bottom Thermal Film Thickness - 1.5 - 10mil Power Requirements - 240V Single Phase 24A Power Consumption - 5760W Rear Rewind With Slitters - Included Foot Pedal - Included Stand With Casters - Included Machine Dimensions (L x W x H) - 87”x 34”x 49” Net Weight With Stand - 846 lbs Safety Approval - TUVus 6. Delivery & Installation Requirements: The Vendor shall be responsible for the complete delivery cycle, including off-loading, inside placement, assembly, and initial startup. All necessary equipment and personnel for off-loading and building installation must be provided by the Vendor. Note: A dedicated 240V, Single-Phase, 24A power source is pre-installed at the designated installation site already. 7. Submission Deadline Updated: Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Monday 30 November 2026 by 4 PM EST. The deadline for receipt of quotes is hereby extended to: 12/8/2026 @ 17:00 PM 8. Please review the new specifications for this requirement: Previous attached specification document has been deleted. The new specification requirement has been attached. All other terms and conditions remain unchanged and in full force and effect. This is a combined synopsis/solicitation for commercial item prepared in accordance with Federal Acquisition Regulation (FAR) Subpart 12.6, as supplemented with additional information included in this notice. Naval Surface Warfare Center Indian Head Division (NSWC IHD), located in Indian Head, Maryland intends to award a firm fixed price (FFP) purchase order using Simplified Acquisition Procedures for: 65” Dual Heat Wide Formant Roll Laminator. This solicitation will be competed as a Brand Name or Equal, Small Business Set-Aside. This announcement constitutes the only solicitation. Quotes are being requested under Request for Quotation (RFQ) no. N0017427Q1002. The NAICS code is 333310 and the business size standard is 1000. The provisions and clauses included and/or incorporated in this solicitation document are those in effect through the Federal Acquisition Circular. This RFQ incorporates all provisions and clauses in effect through Federal Acquisition Circular FAC 2025-06 and the Defense Federal Acquisition Regulation Supplement (DFARS) DPN 20251701. The Government will award a contract resulting from this solicitation to the vendor responsible whose quote, conforming to the solicitation that will be most advantageous to the Government, price and other factors considered. The Government intends to evaluate all timely quotes received from eligible vendors on a lowest price technically acceptable (LPTA) basis. The Government intends to evaluate quotations and award a contract without discussions with quoters. The Government reserves the right to conduct discussions if the Contracting Officer later determines them to be necessary. The Government will make award based on the availability of funds. Specifications: Laminator Series that delivers versatility, quality and economy all in one easy-to-use unit. The machine can laminate, encapsulate, and mount both vinyl and paper media. Its dual heated rollers can be controlled independently to temperatures up to 266ºF allowing for maximum adhesion for many applications. Operators can encapsulate using 1.5 – 10mil low melt films, cold laminate with PSA film, and board mount with just a few simple changeovers. Accepts film rolls to 10” OD on front and rear swing-out supply shafts for easier set-ups and fewer film changes and are available with a motorized rear rewind option for roll-to-roll applications. The swing up feed table and convenient 36” table height makes it easier for busy operators to stage multiple jobs. REQUIREMENTS Laminating Width up to 65" Dual Heated Rollers Adjustable Speed Control up to 13'/min Roller Gap Control allowing 1" Mounting Capability Web Clutch Adjustment Accommodates LOW MELT Laminating Film 1.5-10mil in Thickness/li> Two Swing-Out Shafts and Two Front Unwind Shafts Dual Tension Control Print Pressure Plate Installation Included 1 Year Mfr Warranty Parts and Labor Core Size – 3” Adjustable Temperature – Yes Moving Idler Bar – Yes Ready Light – Yes Mounting Capability – Yes (1”) Safety Approval – CE - cTUVus Roller Gap Adjustment - Yes Safety Shield – Yes Feed Table Alignment Guide – Yes Speed Feet Per Minute – 0 – 13 fpm Display Type - LCD Machine Dimensions – 69”W x 36” H X 49”D Electrical Requirements – 220V, 60Hz, 22 amps single phase: MAX 5700W Adjustable Speed Control – Yes Reverse Function – Yes Laminating Type – Hot/Cold Max. Laminating Width – 65” Warm up Time – 10 – 20 minutes Min/Max Film Thickness – 1.5 – 10 mil (Low Melt) Evaluation Factors (in order of importance) Technical – The Government will evaluate quotes on a Lowest Price Technically Acceptable (LPTA) basis. To be determined technically acceptable, the quote must clearly demonstrate compliance with all specifications listed under the "Requirements" section. Offerors proposing an "equal" product must submit descriptive literature, product data sheets, or technical specifications that explicitly verify the proposed machine meets or exceeds every key requirement. Price – Quotes must include all applicable costs. Submitted quotes are NOT TO EXCEED $350,000.00 (Simplified Acquisition Threshold). Questions/clarification regarding this solicitation must be submitted via email to Barbara Grinder @ barbara.j.grinder.civ@us.navy.mil by Tuesday 17 November 2026 by 4 PM EST. Quote packages are due by 24 November 2026 by 5 PM EST. (COB). Late quotes will not be considered. Please fill in clauses in RFQ as they apply to your business. Quote packages shall be sent to barbara.j.grinder.civ@us.navy.mil and contain a cover sheet that provides the following information: 1. Official Company Name; 2. Point of contact including name and phone number; and 3. DUNS number and Cage Code. The Points of Contact for this acquisition is: Barbara.j.grinder.civ@us.navy.mil

Key facts

Reference
N0017427Q1002
Procedure
Combined Synopsis/Solicitation
Contact
Barbara Grinder
barbara.j.grinder.civ@us.navy.mil
  • The documents — every attachment, with its text extracted and searchable
  • Qualification — the notice scored against your company profile
  • Tracking and alerts — a pipeline for your bids, and the matching notices by email
  • Calendar export — the deadline as a calendar file
  • The API and MCP — the same record in your own tools and your AI assistant

Provenance

Source
sam-gov
Notice id
55c208ba3b264c57a0b23a78b856100c
First seen
22 Nov 2026
Last updated
22 Nov 2026

Licence US Government work — public domain (17 U.S.C. § 105) ↗

Source: SAM.gov, U.S. General Services Administration — a U.S. Government work, not subject to copyright in the United States.

View at source ↗GET /api/v1/tenders/065fd247-6d79-46f5-bb51-c1977b0a7bb0

The source notice is authoritative — verify deadlines and documents there before bidding.