CLIFFORD PARK PUMP TRACK

Description

Kingsteignton Town Council invites competitive tenders from suitably qualified and experienced specialist contractors for the design and construction of a new asphalt pump track at Clifford Park, Kingsteignton, Devon.Pump Track Specification1. Site PreparationMeasure and mark out the area associated with the pump track.2. TopsoilTopsoil to be set aside for the dressing of the berms etc.3. Drainage80mm dia PVC coil pipe to be laid centrally in the trench, covered with a geotextile membrane and backfilled with 40mm clean angular stone. Drainage pipe to be laid to a nearby ditch approximately 10 metres from track.4. Track Sub-BaseMost of the material required for the track construction can be found on site.5. Track ConstructionThe track will consist of:--Start ramp, rider waiting zone, no more than 2metres in height at a width of 2meters-3 x 180 and 2 x 90-degree berms, 0.8m in height-4 rhythm sections 1.8m riding width, consisting of x number of rollers-All berms to have entry and exit rollers-All berms have a rest platform and also a lower pavement to allow inexperienced riders to ride around the base of the berms on a more level surface.The track has approximately 100 to 250m of rideable surface depending on the track design.6. Track FoundationThe track will have a layer of geotextile (1000 gauge) to prevent weed growth followed by a 200mm layer of type one stone compacted to form the foundation.7. AsphaltLay a 6mm specialist pump track specific asphalt wearing course compacted to a 80mm final depth.The proposed project will provide a recreational facility suitable for a range of ages and abilities.8. LandscapingTopsoil to be used to dress the sides of all Berms, Jumps and Start Hill.Lay turf to all areas associated with the Pump Track.9. Site ReinstatementOn completion of the track reinstate all areas associated with the contract10. ROSPAProvide a full safety report from ROSPA on completion11. Access PathThe access path will be approximately 10-15 metres in length and run from the access gate by the Royal British Legion Building to the starting ramp of the pump track.The area of the path to be levelled throughout its length and excess material used in the construction of the pump track. Width of path to be 2 metres.12. Path Construction1 Lay a geotextile membrane 1000 gauge2 Lay a 150mm layer of type 1 stone3 Lay a fine layer of 10mm to dust stone as the top surfaceFencing: The Council would also like a separate Quote to provide safety fencing around the pump track, including safety meshing. This is to provide a safe environment for the riders and also prevent other park users from accessing inadvertently eg dogs, small children, etc.The contract is expected to include detailed design, site preparation, associated groundworks, construction of the pump track, appropriate drainage and finishing works, together with any other requirements identified within the Council's tender specification.Contractors must demonstrate relevant experience in delivering comparable pump track projects and provide a fully costed submission in accordance with the published tender documentation.The estimated project value is £75,000-£85,000, subject to confirmation of the VAT basis.The final contract award will be subject to evaluation of submissions and formal approval by Kingsteignton Town Council.

Key facts

Reference

NOV675864

Procedure

Below threshold - open competition

Lots

1

Contact

finance@kingsteignton.gov.uk

01626 364089

Contract period

1 Mar 2027 → 15 Apr 2027

Value incl. VAT

£90k

Category

Works